What Does Anti-Rust Oil Need to Pay Attention to During Transportation?

In modern industrial transportation, the treatment of anti-rust oil during transportation will affect the final anti-rust effect of the product. The correct mode of transportation can not only ensure the quality of the anti-rust oil itself, but also ensure good protective performance.

Introduction of anti-rust oil:

Anti-rust oil can directly contact the metal to form a protective film, specifically for ferrous metals, and the protective effect is more comprehensive. Our anti-rust oil has passed three international certifications of ROHS, SGS, and REACH. There are no heavy metals or harmful solvents. It is very safe to use. It can also meet the anti-rust needs of global export products. Whether it is domestic transportation or cross-border transportation, it meets environmental protection and safety standards.

Correct use of anti-rust oil:

Clean the metal surface first, wipe off obvious oil stains and dust, and then choose a suitable application method. Small parts can be brushed with a brush, and large areas of metal can be sprayed with a sprayer. Just apply a thin layer of anti-rust oil. After coating, let it stand and let the oil film form before packaging or transportation.

It should be noted that different metals choose corresponding models, and some anti-rust oil is only suitable for ferrous metals. If you want to protect non-ferrous metals such as aluminum and copper, you must choose special products. Don't use the wrong model to affect the anti-rust effect.

What does anti-rust oil need to pay attention to during transportation?

1. The packaging should be sealed. Metal products coated with anti-rust oil should be wrapped in sealed bags or anti-rust films to prevent contact with rain and moisture during transportation, destroy the oil film, and affect the anti-rust effect.

2. Do not expose to high temperature. The ingredients in anti-rust oil are easily volatile at high temperatures. Keep away from heat sources during transportation, otherwise it will affect the coating effect.

3. Prevent violent collisions. Metal parts coated with anti-rust oil should be separated by foam or bubble film. Do not let the parts rub against each other and rub off the oil film, especially sharp-shaped parts, but also do a good job of protection.

4. Keep away from fire sources and oxidants. Anti-rust oil is a flammable product. It should be transported away from open flames and cigarette butts, and should not be mixed with oxidants to prevent chemical reactions and cause safety risks.

5. Be rainproof and moisture-proof. If it rains during transportation, check whether the truck compartment is leaking. For metal products coated with high concentrated VCI oil, put a few packs of drying agent to keep the environment dry.

When conducting cross-border transportation, prepare the certification documents of the product to facilitate customs inspection, and do not delay customs clearance due to incomplete documents.

Application of high concentrated VCI oil:

High concentrated VCI oil is mainly used in machinery manufacturing, automobiles, hardware, logistics and other industries. Engine parts in the machinery factory should be coated with high concentrated VCI oil before leaving the factory and then transported to prevent rust during transportation. Screws and nuts in hardware stores are stored in batches after being coated with high concentrated VCI oil, which can extend the shelf life; when logistics companies transport metal equipment, they will be coated with high concentrated VCI oil to ensure that the equipment can be used normally after long-distance transportation.

High concentrated VCI oil market trends:

Now the market demand for high concentrated VCI oil has increased, the export volume of metal products has increased, and the requirements for anti-rust and environmental protection are higher. Traditional anti-rust oils do not meet export standards, and long-distance transportation and cross-border transportation have increased, and more durable anti-rust oils are needed. Our high concentrated VCI oil can meet the demand well.

Conclusion:

High concentrated VCI oil should pay attention to sealing, anti-high temperature, anti-collision, keep away from fire sources, rainproof and moisture-proof during transportation. Doing these well can ensure product performance and metal protection effect. Our high concentrated VCI oil can meet the needs of different scenarios, and can provide suitable products and services.

Contact us:

In addition to standard products, CVCI also provides customized services. The product formula and packaging form can be adjusted according to the specific needs of customers. Our technical support team is ready to provide customers with professional advice and services. If you have any questions, please feel free to contact us cvci-gaoxiu@chinavci.com . I believe we can provide you with satisfactory products.

References:

1. ASTM G96-90 "Standard Test Method for Gas Phase Corrosion Inhibitors"

2. China Metal Anti-rust Materials Industry Development Report (2024)

3. International Dangerous Goods Transport Compliance Guide (2025)

4. "Research on the Transportation Stability and Protective Properties of high concentrated VCI oil " ("Material Protection" No. 9, 2023)