How to Use Electrostatic Spray Anti Rust Oil Correctly?

The anti-rust effect of electrostatic spray anti rust oil depends not only on the quality of the product, but also on the correct use. How can it be used correctly to ensure the anti-rust effect? We must control the details so that electrostatic spray anti rust oil can give full play to its role and keep metal workpieces away from rust during storage, transportation and storage.

First of all, the surface treatment of the workpiece must be done well. It is necessary to ensure that the surface of the workpiece is dry, dust-free, and oil-free. If there is moisture on the surface, anti rust lubricant penetrating oil cannot adhere tightly, and it may be mixed with moisture to affect the protection. If there is dust or oil, it will separate the oil film from the workpiece, causing the oil film to fall off. We can wipe off the surface dust with a clean rag, use a special cleaning agent to remove the oil, and then put it in a ventilated place to dry. After confirming that there are no impurities on the surface, we can spray it.

Then choose the right spraying equipment and adjust the parameters. Anti rust lubricant penetrating oil should use special electrostatic spraying equipment, and before use, adjust the parameters of the spray gun according to the viscosity of the oil, such as pressure and atomization angle, to ensure that the oil can form a uniform mist, so that the spraying on the surface of the workpiece will not appear local accumulation or leakage spray. If the parameters are not adjusted well and the oil atomization is not good, it may form a sagging on the surface of the workpiece, and the waste of oil will also affect the protection. If the pressure is too small, the oil coverage is uneven, and it is easy to leave a protective dead corner. Experienced workers will first test spray on the waste workpiece, observe the atomization effect, and ensure the stability of the effect before formally spraying.

When spraying, pay attention to the uniformity and dosage, which are related to the stability of the anti-rust effect. When holding the spray gun, keep a suitable distance, generally about 20-30 cm, and move the spray gun at a uniform speed so that electrostatic spray anti rust oil can be sprayed evenly on the metal surface to ensure that every part can be covered without leakage or omissions, forming a continuous and complete film.

The treatment after spraying is also very important. After spraying, put the workpiece in a well-ventilated environment and let the solvent in the oil evaporate naturally to form a stable oil film. It should also be noted that after spraying, do not directly touch the treated surface with your hands. The sweat and grease on your hands will damage the oil film and destroy the protective effect.

The electrostatic spray anti rust oil produced by CVCI is strictly guaranteed in terms of quality, and can be well adapted to the standardized operation process to make the anti-rust effect more stable. Our electrostatic spray anti rust oil also adds high-quality anti-rust ingredients, which can effectively resist the erosion of metals by moisture and oxygen. Hardware accessories, mechanical parts, or large metal components can provide reliable protection.

We will also provide customers with professional use guidance to help customers standardize the operation process so that electrostatic spray anti rust oil can achieve the best results. If customers encounter problems during use, our technical team will follow up in time to help analyze the cause and provide solutions. If you are interested in our electrostatic spray anti rust oil, please feel free to contact us.