Multipurpose Electrostatic Spray Anti Rust Oil
1. Anti Rust Lubricant Penetrating Oil is sprayed electrostatically, and the oil film is evenly covered, tightly attached and not easy to sag.
2. Electrostatic Spray Anti Rust Oil has excellent anti-corrosion performance and basic lubrication function, and is suitable for a variety of metal surfaces.
3. After Electrostatic spraying anti rust oil is formed into a film, it is thin and transparent, does not affect the appearance and size of the parts, and is easy to clean.
- CVCI
- China
- 14 days after payment
- 1500 tons per month
- Information
Product introduction of Multipurpose Lubricant Rust Preventive Oil:
Multipurpose Lubricant Rust Preventive Oil uses low-viscosity refined mineral oil and adds a variety of rust inhibitors, film formers, and surfactants to form a stable rust prevention system, including a new oil-soluble rust inhibitor developed by CVCI and exclusively produced in China. Multipurpose Lubricant Rust Preventive Oil has excellent rust prevention performance and washability.
Product model: SF/Y 242D60
Instructions for using Electrostatic spraying anti rust oil:
1. Ensure that the surface of the workpiece is dry, dust-free and oil-free so that Electrostatic spraying anti rust oil can adhere well.
2. Use special electrostatic spraying equipment and adjust the spray gun parameters according to the viscosity of the oil to maintain a good atomization effect.
3. Spray Anti Rust Lubricant Penetrating Oil evenly on the metal surface to ensure that there is no leakage or sagging, forming a continuous film.
4. After spraying, place it in a well-ventilated environment to naturally evaporate the solvent and form a stable oil film.
5. Avoid open flames during operation and keep the construction area well ventilated. Avoid direct contact with the treated surface with your hands after spraying to avoid damaging the oil film.
Product Performance Indicators:
| Item | SF/Y 242D60 | Test method |
| Appearance | Brown transparent liquid | Visual inspection |
| Flash point (open) ℃ ≥ | 130 | GB/T 3536 |
| Viscosity (40℃ mm²/s) | 9-14 | GB/T 265 |
| Wet heat test (10# steel, grade A) h ≥ | 336 | SH/T 2361 |
How to use Anti Rust Lubricant Penetrating Oil:
When using Anti Rust Lubricant Penetrating Oil, the recommended oiling amount for single-sided panels is 0.8g/m², and the allowable range is 0.6-1.0g/m². Customers can adjust according to actual anti-rust needs. In case of humid weather or rainy season, the amount of oiling should be appropriately increased to enhance the protective effect. Before construction, ensure that the surface of the steel plate is clean and dry, and the surface temperature is controlled between 20-50℃. During the spraying process, the oil film should be evenly and continuously covered, and no omissions should be allowed. It is strictly forbidden to touch the treated surface with bare hands to prevent damage to the anti-rust oil film and affect the protective performance.
Packaging and storage:
Electrostatic Spray Anti Rust Oil is valid for one year. It is recommended to store it in a sealed container indoors to avoid moisture or other impurities to maintain product stability. Electrostatic Spray Anti Rust Oil should be stored in a cool, dry, well-ventilated environment away from sunlight and rain, and away from fire and high-temperature heat sources. Electrostatic Spray Anti Rust Oil is a flammable chemical and must be stored and transported in accordance with relevant dangerous goods management requirements to ensure safety during use and long-term stability of product performance.
