In the metal processing, storage and transportation links, anti-rust treatment is an important step. However, traditional anti-rust oils need to dry off moisture, the oil film is heavy and the application scenarios are narrow, and sealed anti rust oil is gradually being chosen more and more. What are the advantages of sealed anti rust oil?

Do you understand the core advantages of sealed anti rust oil?

1. Before using traditional anti-rust oil, the moisture on the metal surface must be completely dried, and sealed anti rust oil does not need to be so troublesome, even if the metal surface is watered or there is sweat left by the operator, it can be directly applied. For example, after the hardware parts are cleaned, there is no need to wait to dry or blow dry with compressed air. Just spray sealed anti rust oil directly, which improves efficiency a lot.

2. Ordinary anti-rust oil can only form an oil film on the dry metal surface and cannot deal with the existing moisture, but sealed anti rust oil can be firmly adsorbed on the metal surface through special active ingredients and at the same time drain the moisture away. For example, after workers touch steel parts with wet hands and apply sealed anti rust oil in time, the salt in the sweat stains can be avoided from reacting with the metal, which cannot be done with ordinary anti-rust oil.

3. The oil film of traditional anti-rust oils is usually thicker and more viscous, which will make the size measurement of metal parts inaccurate. Slippage or oil pollution may occur during subsequent assembly, and additional cleaning may be required before processing. The oil film formed by dewatering type antirust oil is very thin and non-sticky, and it feels smooth and non-stick to the hand. When measuring the size of the parts, the oil film does not affect the accuracy, and subsequent direct operation is fine.

4. The fluidity of dewatering type antirust oil is better than that of ordinary anti-rust oil, and it can be easily adapted to various construction methods such as spraying, soaking, and brushing, and its small amount not only reduces material costs, but also avoids the problem of too thick oil film.

5. Many industries have high requirements for the cleanliness of metal surfaces. The residues of traditional anti-rust oils may affect product performance and must be cleaned, but sealed anti rust oil is not required. This means that in the application, there is no need to spend additional time and cost to clean the anti-rust film, and you can directly enter the next process.

Our dewatering type antirust oil:

The dewatering type antirust oil produced by CVCI has the above advantages. It can not only be used for ferrous metals such as steel and iron, but also for non-ferrous metals such as aluminum, copper, and zinc. It will not cause corrosion or discoloration on the metal surface. It does not need to be purchased separately according to the material. It complies with national environmental protection standards and EU REACH regulations, and can meet the environmental protection requirements of export products.

Our production capacity:

We have a mature dewatering type antirust oil production line, which can stably supply products of different specifications to meet the bulk procurement needs of various industries, and each batch of dewatering type antirust oil will be tested before leaving the factory to ensure that the product performance is stable and up to standard. And according to the individual needs of customers, we can provide flexible customized services to meet the different needs of different customers.

Conclusion:

The advantages of dewatering type antirust oil, from step-saving, anti-corrosion, suitable processing, easy construction, and cost-saving, solve the pain points of traditional anti-rust oils, and are an efficient choice for metal anti-rust. Our dewatering type antirust oil not only includes these advantages, but also meets special needs through customized services, which can be adapted to the anti-rust needs of many industries such as automobiles, electronics, and export machinery.

Contact us:

If you are interested in our dewatering type antirust oil, or have special anti-rust needs and need customized products, you can contact us at any time cvci-gaoxiu@chinavci.com . We will recommend suitable products based on your metal material, production process, and storage environment. Major companies are welcome to consult.